How Much Does a Home Golf Simulator Cost? 4 Real Builds, Priced

A complete home golf simulator, with a launch monitor, enclosure and impact screen, projector and hitting mat, runs from $2,927.94 for our Entry build to $24,807.90 for our Luxury build at today’s prices, before you buy a computer or software. This page prices all four parts, assembles four complete builds from budget to high end, and uses owner ratings from our buyer survey, with more than 650 responses, to show where the money is best spent.

A simulator budget comes down to four purchases: the launch monitor, the enclosure with its impact screen, the projector and the hitting mat. Software and a computer sit on top of that. All prices were checked at Carl’s Place and Shop Indoor Golf (plus one VTrack listing at Golf Simulators Direct) on October 6, 2026, and the launch monitor is the part that sets the budget.

Home golf simulator cost at a glance

Four builds cover the whole market, from a first garage setup to a dedicated simulator room. Each total includes the launch monitor, the enclosure with impact screen, the projector and the hitting mat.

Every build also has two swap launch monitors. With those fitted, the ranges run: Entry $2,927.94 to $3,127.94, Sweet Spot $5,793.94 to $7,098.93, Premium $12,707.90 to $13,207.90, and Luxury $19,807.90 to $24,807.90. Totals are the sum of the listed parts at the listed stores, using the “from” price where a kit lists one, and they exclude a computer, software, tax, shipping and, for the Entry build, the EMT pipe for the frame.

Four home golf simulator builds, priced

Each build below is a complete setup, and each total is the sum of its parts at the listed store prices. Every build also lists two swap launch monitors with the recalculated total, plus the owner ratings that explain the pick.

Entry build: $2,927.94

The Entry build is the cheapest complete simulator on this page, and it suits a first build in a garage or spare room. The Garmin R10 sits behind the ball, the DIY enclosure keeps the price down in exchange for cutting pipe to length yourself, and the BenQ TH671ST is a 1080p lamp projector rated at 3,000 lumens.

Two costs sit outside that total: the Carl’s Place DIY kit frame uses 1-inch EMT pipe that you buy locally and cut to length, and frame padding is a separate purchase.

The survey explains the launch monitor choice. The R10 is the most-owned monitor in our survey with 106 owners, but those owners rated its accuracy 5.6/10, the lowest of the 18 monitors in our ratings table below, and only 65% would buy it again. The Rapsodo MLM2PRO swap ($549.99, total $2,977.94) scored 6.5/10 for accuracy from 40 owners, though 92% of them say a subscription is required. The Square Golf swap ($699.99, total $3,127.94) is the data play: 34 owners rated it 8.3/10 for accuracy, 97% would buy it again, and none said it needs a subscription.

Sweet Spot build: $5,793.94

The Sweet Spot build suits the golfer who is going to use this thing most weeks and wants the room to look like a room, not a science project. The SkyTrak MAX sits beside the ball, and the SIG10 enclosure arrives as a packaged unit with the SIGPRO Premium impact screen, surround and foam padding in the box, so there is no separate padding purchase and nothing to source at the hardware store.

71 owners rated the SkyTrak MAX 7.7/10 for accuracy, and 88% would buy it again. Both swaps score higher in owner ratings: 40 Uneekor EYE MINI owners rated it 8.8/10 with 100% would buy again, and 68 Bushnell Launch Pro owners rated it 9.0/10 with 83% would buy again. Check the subscription column before you swap, though: 25% of EYE MINI owners and 67% of Launch Pro owners say one is required, against 50% of SkyTrak MAX owners. With the EYE MINI ($2,999) the build totals $7,097.94; with the Launch Pro ($2,999.99), $7,098.93.

Premium build: $12,708.90

The Premium build suits a dedicated space: a basement corner or a garage bay where the simulator stays set up, and a golfer ready to mount a launch monitor overhead. The ProTee VX mounts on the ceiling, so nothing sits on the floor between you and the screen, and the Uneekor EYE XO swap is overhead the same way. The Carl’s Place Pro enclosure kit and the BenQ AH700ST, a 4,000-lumen 1080p laser projector, fill out a room built to last.

20 ProTee VX owners rated it 9.2/10 for accuracy and 4.9/5 for ease of setup, and all 20 would buy it again. The EYE XO swap scored 9.0/10 for accuracy from 7 owners, though 71% of them report a required subscription. The Foresight GC3 swap scored the same 9.2/10 from a larger group of 35 owners, and only 7% of them say a subscription is required. With the EYE XO ($6,499) the build totals $12,707.90; with the GC3 ($6,999), $13,207.90.

Luxury build: $22,803.90

The Luxury build suits the dedicated room and the golfer who wants the highest owner-rated accuracy on this page. The BenQ LK936ST is a 4K UHD laser projector rated at 5,100 lumens, and the Carl’s Place Pro enclosure kit is the same premium shell the Premium build uses. The money goes into the launch monitor: the Trackman iO alone is $13,995.

9 Trackman iO owners rated it 9.6/10 for accuracy, the highest score of any monitor in our survey with five or more responses, along with a 5.0/5 first impression, and all 9 would buy it again. The subscription point matters at this level: 100% of Trackman iO owners and 100% of Uneekor EYE XO2 owners say a subscription is required, while 29% of GCQuad owners say so. The EYE XO2 swap ($10,999) totals $19,807.90, and its 28 owners rated accuracy 9.3/10. The Foresight GCQuad swap ($15,999) totals $24,807.90, the highest on this page; its 24 owners rated accuracy 9.1/10, but only 71% would buy it again.

Home launch monitor prices

The launch monitor sets both the budget and the data quality, so here is the full price list first, then the owner ratings behind it. Sensor position matters as much as price: it decides where the unit sits in your room and how much depth you need.

Here is how owners rated the same 18 monitors in our 2026 buyer survey:

We surveyed golf simulator buyers on r/golfsimulator in the first quarter of 2026 and asked them about their purchase, including their first impression, ease of setup, accuracy, and whether they would buy the same launch monitor again. With more than 650 responses, it is a unique look at how buyers rate their launch monitors. We show ratings only where five or more owners answered. See how we rate golf gear.

Three things the table says. The Garmin R10 is the most-owned monitor in the survey by a wide margin, with 106 owners, and it is the cheapest at $499.99. It also has the lowest accuracy score in this table, 5.6/10, and 65% would buy it again. It is the cheapest way into a full simulator, and the ratings show the trade-off.

Square Golf is the value story in the data: at $699.99, its 34 owners rated accuracy 8.3/10 and ease of setup 4.8/5, 97% would buy it again, and none said a subscription is required. The Uneekor EYE MINI LITE is close behind at $1,999 with 8.7/10 accuracy and 100% would buy again, but 89% of its owners say a subscription is required.

Subscriptions change the real cost of ownership. 92% of Rapsodo MLM2PRO owners and 89% of EYE MINI LITE owners say one is required, and at the top of the market it is unanimous: 100% of Trackman iO and EYE XO2 owners say a subscription is required. Price tracks with accuracy at the top end, too. Every monitor priced at $5,000 or more scored 9.0/10 or higher for accuracy. Just under that line, the Full Swing KIT, at $4,999.99, scored 6.8 from only 6 owners.

For ready-made shortlists, see our best launch monitors under $1,000 and our best launch monitors under $5,000.

Enclosure and impact screen cost

Enclosures come in three types. A DIY pipe kit, like the Carl’s Place DIY Enclosure Kit, is the cheapest route: the enclosure fabric and impact screen are included, and you buy 1-inch EMT pipe locally and cut it to length, with padding sold separately. A packaged enclosure, like the SIG10 and SIG12 from Shop Indoor Golf, arrives with the impact screen, surround and foam padding in the box, and the SIG10 is designed so the image fills 100% of the screen. The Carl’s Place Pro kit is the premium option, and it is the enclosure in both the Premium and Luxury builds.

When the screen wears out, you replace the screen, not the whole enclosure. Carl’s Place sells three replacement impact screens, so a worn screen is a parts order, not a rebuild.

Our best golf simulator enclosures roundup compares more sizes and brands, and the budget DIY golf simulator build guide walks through the cheapest route end to end.

Projector cost

Throw ratio is the spec that decides whether a projector works in your room, because it has to match where the unit can hang relative to the screen. Get it wrong and the image will not fill the screen, no matter how good the projector is. This is not a theoretical worry: before Reid ordered his enclosure, Carl’s Place customer service reviewed his layout drawings and caught a projector throw-ratio mistake in his plan.

Our best golf simulator projectors roundup has the full comparisons, and the projector throw calculator does the math for your room before you order.

Hitting mat cost

Two mats cover every build on this page. The Country Club Elite Golf Hitting Mat is the Entry pick, and the Carl’s HotShot Golf Mat System is the mat in the other three builds. The mat is the part of the simulator your body takes the hit from on every swing, so it is not the place to shave the budget.

Our best golf hitting mats guide covers more options at other sizes and price points.

Software and computer

Most of the software listings below are annual subscriptions, so check the term before you buy. GSPro is a $250 yearly subscription license. E6 Connect sells one-year subscriptions at $300 for Basic and $600 for Expanded, plus an E6 Connect Home edition with 27 courses at $1,000, with the term not stated on the listing. Awesome Golf is listed as a lifetime membership at $349.99, and Creative Golf 3D starts at $500 with the term not stated.

Most simulator software runs on a Windows PC, and the computer is a real cost, but we do not price one here because the right spec depends on the software you choose. If GSPro is the plan, our GSPro system requirements guide lists what to aim for, and our golf simulator software guide compares the options.

Pricing a bay for a business instead? See our commercial golf simulator cost guide.

Room prep costs to plan for

These costs depend on your room and your local trades, so no two rooms get the same bill. Plan for all four before you order anything, because every one of them is cheaper to handle before the build than to fix after it.

Electrical

The launch monitor, projector and computer all need power where they live, not across the room. An outlet behind or beside the sim beats an extension cord running across a hitting area. If the garage or basement needs a new circuit, have a local electrician quote it before you budget the rest of the build.

Heating and cooling

A simulator in an uninsulated garage is a seasonal toy. If you want it usable in January and July, settle the insulation, heating and cooling plan before the enclosure goes up. What that costs depends entirely on your room and your climate.

Sound

A driver strike is loud in an unfinished garage, and the sound carries. The enclosure fabric absorbs some of it. Rugs, acoustic panels and moving blankets on hard surfaces handle the rest, and they are all easier to add before you are trying to fix an echo.

Wall and ceiling protection

Everyone eventually hits one off the toe, and the screen does not cover the whole wall. Frame padding and wall protection are cheap compared with patching drywall, and our guide to protect your walls and ceiling covers the options.

Buy it all at once or build it in stages?

Buying everything at once means one setup day and a working simulator straight away, with every part chosen to work together. Building in stages means starting with the Entry build and upgrading the part that bothers you most once you know how you actually use it.

Reid’s garage is the worked example. He kept his Square Golf launch monitor and Bullseye hitting mat and spent about $4,200 upgrading everything around them: the enclosure, projector, mount, landing pad and the small stuff.

If you stage it, upgrade in this order: the launch monitor sets your accuracy, the enclosure and screen set your safety and your image, and the projector sets your picture. To plan the bay before you spend, start with our free golf simulator plan, and Carl’s Place has a Build Your Own Golf Simulator tool for laying out the parts.

Ongoing costs

Three costs keep running after the build is paid for.

Software first. GSPro renews at $250 a year, and the E6 Connect subscriptions run $300 to $600 a year depending on tier. Awesome Golf is the pay-once option in our table, listed as a lifetime membership at $349.99.

Screens wear. Carl’s replacement impact screens run from $179.95 for the Standard to $439.95 for the Premium, so plan the replacement as a line item rather than a surprise.

And some launch monitors need their own subscription. Check the subscription column in the owner ratings table before you buy, because that cost runs every year you own the monitor.

Home golf simulator cost FAQ

How much does a cheap home golf simulator cost?

The cheapest complete build on this page totals $2,927.94. It pairs the Garmin Approach R10 launch monitor at $499.99 with the Carl’s Place DIY Enclosure Kit with Impact Screen from $999.95, the BenQ TH671ST projector at $949 and the Country Club Elite hitting mat at $479. The total excludes a computer, software, tax, shipping and the 1-inch EMT pipe for the frame, which you buy locally.

What is the best value launch monitor for a home simulator?

Going by owner ratings rather than our opinion, two stand out against their price. The Square Golf, at $699.99, drew 8.3/10 for accuracy and 4.8/5 for ease of setup from its 34 owners, 97% would buy it again, and none reported a required subscription. The Uneekor EYE MINI, at $2,999, drew 8.8/10 for accuracy from 40 owners with 100% would buy again, and only 25% of its owners say a subscription is required.

Do golf simulators need a subscription?

Some launch monitors do, and owners are clear about which. In our survey, 92% of Rapsodo MLM2PRO owners and 89% of Uneekor EYE MINI LITE owners said a subscription is required, and every Trackman iO and EYE XO2 owner said the same. At the budget end it is rare: 6% of Garmin R10 owners, 3% of Mevo+ owners and none of the Square Golf owners said so. Software adds its own cost for most setups: GSPro is a $250 yearly license and E6 Connect runs $300 to $600 a year, while Awesome Golf is listed as a $349.99 lifetime membership.

How much room do I need?

Enough depth for the monitor you pick, plus room for your swing and a screen that catches the miss-hits. Our comparison tool lists a room depth for every monitor it tracks, from 8 feet for the Uneekor EYE MINI to 18 feet for the ProTee VX. Our golf simulator room size guide covers ceiling height, width and depth.

Can I build a golf simulator in stages?

Yes, and it is how a lot of garages get built. Yardstick founder Reid Colson kept his Square Golf launch monitor and Bullseye hitting mat and spent about $4,200 upgrading the enclosure and projector around them. Start with a complete Entry build, then upgrade the launch monitor first if shot data is what bothers you, because it is the part that sets accuracy.

Do overhead launch monitors cost more?

Yes. The overhead units in our price table run from $5,000 for the VTrack to $10,999 for the Uneekor EYE XO2, while the cheapest floor unit, the Garmin Approach R10, is $499.99.